Showing 2225–2240 of 2574 results
PHY-MECH-12 PULLEY (ROD MOUNTING)
SSI-PHY-MECH-12
Comprising a 50mm pulley with ball bearing mounted on a square aluminum boss of size about 20 × 20 × 110mm (W × H × L), provided with a hole and clamping screw to accommodate rods up to 13mm diameter. Provision for mounting the pulley on the boss frame with
PHY-MECH-16 ALUMINIUM PULLEY (MOUNTED ON ROD)
SSI-PHY-MECH-16
Pulley mounted in U-bracket having a rod 150×10mm (length × diameter) along the length of pulley for attaching it to a suitable clamp. SSI-PHY-MECH-16.1 Dia. 38mm SSI-PHY-MECH-16.2 Dia. 50mm
PHY-MECH-17 PLASTIC PULLEY (MOUNTED ON ROD)
SSI-PHY-MECH-17
Pulley mounted in U-bracket having a rod 150×10mm (length × diameter) along the length of pulley for attaching it to a suitable clamp. SSI-PHY-MECH-17.1 Dia. 38mm SSI-PHY-MECH-17.2 Dia. 50mm
PHY-MECH-18 PENDULUM BOBS (BRASS)
SSI-PHY-MECH-18
These are made of following type of different material: Catalogue No. Size(DIA) SSI-PHY-MECH-18.1 Aluminum 13mm SSI-PHY-MECH-18.2 Lead 13mm SSI-PHY-MECH-18.3 Brass 13mm SSI-PHY-MECH-18.4 Copper 13mm SSI-PHY-MECH-18.5 Iron 13mm SSI-PHY-MECH-18.6 Zinc 13mm SSI-PHY-MECH-18.7 Aluminum 19mm SSI-PHY-MECH-18.8 Lead 19mm SSI-PHY-MECH-18.9 Brass 19mm SSI-PHY-MECH-18.10 Copper 19mm SSI-PHY-MECH-18.11 Iron 19mm SSI-PHY-MECH-18.12 Zinc 19mm SSI-PHY-MECH-18.13 Aluminum
PHY-MECH-19 PENDULUM (STAND)
SSI-PHY-MECH-19
Three 2.5-cm pendulum bobs of wood, iron and steel are suspended from a common hanger mounted on a vertical rod screwed to a heavy metal stand. A meter scale and a sliding index with projecting piece is provided. The sliding index can control the length of the first cord. Zero
PHY-MECH-22 SPHERE
SSI-PHY-MECH-22
These are made of following type of different material Catalogue No. Size(DIA) SSI-PHY-MECH-22.1 Wood 3mm SSI-PHY-MECH-22.2 aluminum 3mm SSI-PHY-MECH-22.3 steel (hardened and chrome plated) 3mm SSI-PHY-MECH-22.4 copper 3mm SSI-PHY-MECH-22.5 brass 3mm SSI-PHY-MECH-22.6 lead 3mm SSI-PHY-MECH-22.7 Marbles 3mm SSI-PHY-MECH-22.8 Wood 6mm SSI-PHY-MECH-22.9 aluminum 6mm SSI-PHY-MECH-22.10 steel (hardened and chrome plated)
PHY-MECH-23 TICKER TAPE TIMER (12V AC)
SSI-PHY-MECH-23
For the measurement of speed and acceleration. It operates on 12V AC and is safe for students. Paper tape, drawn through guides, is struck by a dotting screw carried on the armature. On wooden base with 4 mm sockets. Includes one roll of tape and 12 carbon discs. Transformer: Suitable
PHY-MECH-24 TICKER TAPE TIMER (6V AC)
SSI-PHY-MECH-24
Ticker Tape Timer Input 6V AC These devices use an electromagnet which activates a striker, producing dots via a carbon disk on the ticker tape. With 4mm terminal sockets. The dots are produced at a rate of 50 – 60Hz depending on the mains frequency. The Ticker Tape Timers are
PHY-MECH-27 ATMOSPHERIC PRESSURE CUP
SSI-PHY-MECH-27
This pair of Magdeburg hemispheres is a convenient way to demonstrate the power of atmospheric pressure and vacuum. You get two rubber Magdeburg hemispheres about 3″ in diameter. Press them together to evacuate the air and form a vacuum between them. Then try to pull them apart.