Showing 1–16 of 20 results
ENERGY TRANSFER APPARATUS (MALVERN) (FLYWHEEL UNIT)
SSI-PHY-MEPT-02
For use with a large motor / generator and a lamp unit to demonstrate the conversion of electrical energy to kinetic energy and then back again. Comprising an iron flywheel 115 mm diameter mass 1.2 kg Mounted in cast bracket with bearings. The shaft has an aluminum ‘V’ pulley 44
PHY-MEPT-01 ENERGY TRANSFER APPARATUS (MALVERN) (MOUNTED MOTOR FOR SOLAR CELL)
SSI-PHY-MEPT-01
Dimensions:-95x75mm (lxw) operating:-0.8 volt DC demonstrate the conversion of solar energy and hence to mechanical energy. A compact and low consumption mounted on a base.
PHY-MEPT-03 ENERGY TRANSFER APPARATUS (MALVERN) (LAMP UNIT TRIPLE)
SSI-PHY-MEPT-03
Comprises three MES lamp sockets connected in parallel with a pair of 4mm terminals. For use with motor/generator to give an indication of their output when used as dynamos. Supplied with three lamps 3.5V, 0.25A.
PHY-MEPT-04 ENERGY TRANSFER APPARATUS (MALVERN) LAMP UNIT TRIPLE(DELUXE)
SSI-PHY-MEPT-04
Comprises three MES lamp sockets connected in parallel with a pair of 4mm terminals. For use with motor/generator to give an indication of their output when used as dynamos. Supplied with three lamps 3.5V, 0.25A. Better quality. All three lamp holders enclosed in insulated cover with only their mouths visible for fixing lamps.
PHY-MEPT-05 ENERGY TRANSFER APPARATUS (MALVERN) (MOTOR GENERATOR)
SSI-PHY-MEPT-05
For use as a driving unit or dynamo. Comprises a low voltage, permanent magnet, DC motor, provided with a pulley. Supplied with driving belt.
PHY-MEPT-06 ENERGY TRANSFER APPARATUS (MALVERN)(LINE SHAFT UNIT)
SSI-PHY-MEPT-06
For showing the conversion from electrical energy, via mechanical, to potential energy by winding up a mass on a cord. One end of the shaft carries pulley, and the other shaft end overhangs the base. Fitted with a cord anchoring collar to enable mass to be wound up. Supplied complete with driving belt.
PHY-MEPT-07 ENERGY TRANSFER APPARATUS (MALVERN)(TURBINE PUMP UNIT)
SSI-PHY-MEPT-07
For use as a water turbine to drive a generator producing electricity or as a pump driven by a motor and raising a head of water to produce potential energy. The rotor encased in a cast metal housing with a clear acrylic front, has eight bucket blades. Two inlet tubules (for turbine and
PHY-MEPT-08 ENERGY TRANSFER APPARATUS (MALVERN)(SPRING UNIT)
SSI-PHY-MEPT-08
For showing potential energy stored in a wound-up steel spring and its conversion to electrical energy by driving a dynamo and lighting a lamp. May also be used to wind up a mass on a cord showing the change from potential energy to kinetic and back to potential in the raised mass. The steel
PHY-MEPT-09 ENERGY TRANSFER APPARATUS (MALVERN)(HEAD OF WATER UNIT)
SSI-PHY-MEPT-09
For use with turbine pump unit to provide an open or closed system in demonstrating the conversion from electrical to kinetic energy in the pump and potential energy in the head of water. Supplied complete with two glass basins and shaped glass tubes. The upper platform has a hole to it sallow use as
PHY-MEPT-10 ENERGY TRANSFER APPARATUS (MALVERN)(HAND WHEEL DRIVING UNIT)
SSI-PHY-MEPT-10
Converts human muscular energy to other forms of energy. For use in driving dynamos, line shafts, fly wheels, pumps etc. The driving and output pulleys are both of 75mm dia. and the intermediate pulley is 20mm dia. giving a step-up ratio of 3.75.
PHY-MEPT-11 ENERGY TRANSFER APPARATUS (MALVERN)(MOUNTED LAMP 12V 24W)
SSI-PHY-MEPT-11
A 12V 24W SBC bulb in a metal socket mounted on a folded metal base 100×63mm approx. with a pair of 4mm sockets. The power rating of the bulb has been chosen so that when it is placed in front of the solar cell, sufficient power is produced to run the motor effectively whilst avoiding
PHY-MEPT-12 WATER TURBINE (DYNAMO MODEL)
SSI-PHY-MEPT-12
Create Light with the Power of Water User Friendly High Quality Demonstrate how the power of water can be used to produce clean energy. Water pressure from your sink faucet churns the turning blades, creating enough energy to power an LED bulb when the optimum water pressure is reached. The
PHY-MEPT-13 STEAM ENGINE (SECTIONAL)
SSI-PHY-MEPT-13
Locomotive design showing cross section of the piston and sliding valve as positioned in the steam chamber (Cylinder), clearly visible through air tight glass plate with forward and reverse motion, smooth enough to demonstrate working even by blowing. Other parts are also clearly visible such as crankshaft, valve control, drive
PHY-MEPT-14 DEMONSTRATION TWO STROKE (PETROL ENGINE)
SSI-PHY-MEPT-14
The model represents the internal structure of engine. The internal surfaces are finished in different colours to indicate air, fuel and gas mixture and exhaust gas contents. The crankshaft can be rotated by hand wheel to show the operating cycle with electrical contact for illuminating a 3-volt lamp as a
PHY-MEPT-15 DEMONSTRATION FOUR STROKE (PETROL ENGINE)
SSI-PHY-MEPT-15
The model represents the internal structure of engine. The internal surfaces are finished in different colors to indicate air, fuel and gas mixture and exhaust gas contents. The crankshaft can be rotated by hand wheel to show the operating cycle with electrical contact for illuminating a 3-volt lamp as a
PHY-MEPT-16 DEMONSTRATION TWO STROKE (DIESEL ENGINE)
SSI-PHY-MEPT-16
A model of two-stroke diesel engine made in aluminium alloy and gun metal.Ignition is shown by means of a miniature bulb.Fuel supply is also sectioned. With hand crank, provided for manual operation. The model is cast alloy construction, mounted on a strong base.