Showing all 15 results
PHY-ELA-01 YOUNG'S MODULUS APPARATUS,SIMPLIFIED
SSI-PHY-ELA-01
Simplified design on the basis of Searle’s pattern,but having square rods joined together through a phosphor bronze strip instead of metal frame. One of the rods has 10-0-10scale with a 0.01mm micrometer head for adjusting the spirit level. Rods have self-centering chuck at its top for holding wires and load
PHY-ELA-02 WIRE TESTER
SSI-PHY-ELA-02
WIRE TESTER It is used to test the stretch and bearing strain of tread, wool, hair, wire etc.Provided in pair with an efficient griping system and may be supported from any laboratory stand while slotted weights are applied to the lower end to provide the stretching force
PHY-ELA-03 STRIP TESTER
SSI-PHY-ELA-03
STRIP TESTER To compare the breaking strain, stretch of carry bag handles, strength of newspaper, stretch of plastic film etc. a pair of strong wooden clamps are used. To avoid slipping of strip, clamps have wing nut fixing and a metallic bar attachment system. The clamp scan hook on to
PHY-ELA-04 YOUNG'S MODULUS APPARATUS, BRASS WIRE
SSI-PHY-ELA-04
YOUNG’S MODULUS APPARATUS, BRASS WIRE Brass Wire for use with Young’s modulus apparatus, for use as comparison or experimental wire.Available in diameters 18 to 28 SWG (any gauge).
PHY-ELA-05 YOUNG'S MODULUS APPARATUS, STEEL WIRE
SSI-PHY-ELA-05
YOUNG’S MODULUS APPARATUS, STEEL WIRE Steel Wire for use with Young’s modulus apparatus, for use as comparison or experimental wire. Available in diameters 18 to 28 SWG (any gauge).
PHY-ELA-06 YOUNG'S MODULUS APPARATUS, SEARLE'S TYPE
SSI-PHY-ELA-06
YOUNG’S MODULUS APPARATUS, SEARLE’S TYPE Young’S Modulus Apparatus, Searle’S Type, Brass Frame, Two cast metal rectangular frames hinged together parallel to each other to allow only vertical relative motion, with a spirit level fixed on a cross-bar pivoted across the frames for noting the reference point. One frame has vertical
PHY-ELA-07 YOUNG’S MODULUS APPARATUS, SEARLE'S TYPE
SSI-PHY-ELA-07
YOUNG’S MODULUS APPARATUS, SEARLE’S TYPE Young’s Modulus Apparatus, Searle’s Type, Aluminum Frame, Two cast metal rectangular frames hinged together parallel to each other to allow only vertical relative motion, with a spirit level fixed on a cross-bar pivoted across the frames for noting the reference point. One frame has vertical
PHY-ELA-08 STRAIN GAUGE
SSI-PHY-ELA-08
STRAIN GAUGE Demonstrates the functioning of Strain gauge sensor. Strain generated on hanging slotted weights on the extreme end of the metallic strip can be observed by using this instrument on interfacing it with instrumentation amplifier. A foil strain gauge is bonded on a spring steel strip mounted on an
PHY-ELA-09 YOUNG'S MODULUS APPARATUS, ECONOMICAL
SSI-PHY-ELA-09
YOUNG’S MODULUS APPARATUS, ECONOMICAL Useful for studying the relationship between load applied to a wire and resulting extension (Young’s modulus of elasticity). Can also be used for comparing elastic moduli of two different wires. Two thick sheet metal strips with clamping screws at the top for wires and metal hooks
PHY-ELA-10 HOOK'S LAW
SSI-PHY-ELA-10
HOOK’S LAW For demonstrating hooke’s law. Consists of rod mounted vertically on a stable base with a steel scale graduated 0-30cm x 1mm and provision for its height adjustment. An integrated mass hanger and pointer is attached to the lower end of the spring. Loading the hanger produces extension in
PHY-ELA-11 HOOKE'S LAW APPARATUS,SS SCALE
SSI-PHY-ELA-11
HOOKE’S LAW APPARATUS,SS SCALE For demonstrating hooke’s law. Consists of rod mounted vertically on a stable base with a steel scale graduated 0-15cm x 1mm and provision for its height adjustment. An integrated mass hanger and pointer is attached to the lower end of the spring. Loading the hanger produces
PHY-ELA-12 WIRE HOLDING METAL CHUCKS, UNIVERSAL
SSI-PHY-ELA-12
WIRE HOLDING METAL CHUCKS, UNIVERSAL Wire Holding Chuck, Universal: Plated metal. Has double ended chuck-one for wires upto 1.2mm while other for thicker wires.Comes with a push fit head at the top for mounting.
PHY-ELA-13 WIRE HOLDING METAL CHUCKS
SSI-PHY-ELA-13
WIRE HOLDING METAL CHUCKS Wire Holding Chuck, Simple: For wires upto 1.2mm diameter.
PHY-ELA-14 TORSION APPARATUS
SSI-PHY-ELA-14
TORSION APPARATUS Torsion apparatus having one circular disc with bearings and chunk, one pointer, one counter bearing the chunk. Specially designed for determining the torsion coefficient of metal wire with static and dynamic means. Whole assembly is mounted on a metallic heavy base with leveling screw.
PHY-HEAT-42 Linear Expansion Apparatus Precision Dial type
SSI-PHY-HEAT-42
The accuracy in determination of coefficient of linear expansion of the material of a rod depends on the precision in the measurement of the expansion produced, which is provided by a dial gauge indicator, graduated 0.01mm per division. Ideal for higher grade students. The expansion rod is located in a